Technische Alternative UVR 63H, Руководство по эксплуатации и установке

Страница: 27 / 68

27
Operation
The large display contains the symbols for all important information and a plaintext area.
Navigation with the coordinate keys is matched to the display sequence.
To the side of the display, the currently active outputs are identifiable on
the green illuminated figures 1 - 3. If the speed control is active, the output
1 display flashes according to the speed stage.
Change a value (parameter)
When a value is to be changed the arrow key must be pressed in a downward direction.
This value now blinks and can be changed using the navigation keys.
By pressing the arrow key in an upward direction it is saved.
All display segments are momentarily displayed when the device is
started up.
Subsequently the type designation and version number are displayed
(important for support queries).
The ex factory default setting is loaded by pressing
the key during plugging in.
Navigation keys within a level and for changing parameters.

Entry to a menu, release of a value for changing with the navigation
keys (enter key).

Return from the last menu level selected, exit the parameterizing of
a value (return key).

3
2
1
Value
blinks Value
blinks
Value
blinks