manualshive.com logo in svg

Technische Alternative UVR 63, Инструкции по эксплуатации и установке

Поделиться
Скачать
Technische Alternative UVR 63 Скачать руководство пользователя страница 63

63 

Operation 

 
The large majority contains all of the icons needed for all of the important information as 

well as a plain text field. Navigation with the co-ordination keys has been adapted to the 
display arrangement. 

 

 

  












 = Navigation keys to select the display and change parameters. 

    =  Entry in a menu, release of a value to modify with the navigation keys (enter key). 

 =  Return to the last menu level selected, exit the parameter level for a value (return key). 

In the main level, the left/right arrows 



 are the navigation keys to select the desired 

display, such as collector or storage tank temperature. A different sensor symbol flashes for 
each pressure and the corresponding temperature is displayed.

  

 

Sensor symbol flashes: the temperature for 
this sensor is displayed

 

 
 

Pump symbol flashes: 
The output is active 
(Pump is running) 

 
 

Current temperature of 
sensor 1 

 
For programs, for which it is not possible to display a diagram in the display, the upper area 
remains empty. For some programs, the display was only approximately matched to the 
actual diagram, individual symbols may be missing. 
 
To the side of the display, the currently active outputs are identifiable 
on the green illuminated figures 1 - 3. If the speed control is active, the 
output 1 display flashes according to the speed stage. 
 

 

 

     

3 

   2 
 1 

Содержание UVR 63





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды