40
6.3 AV source
>
Press the
AV
button to open the
AV sources
selection window and select a device
connected to the HDMI inputs
(HDMI (front), HDMI 1 / 2)
, component input
(YPbPr)
,
Scart socket
(EuroAV)
, VGA port
(VGA)
, or front AV port
(A/V (front))
on the TV.
>
Select the source you want using the
up/down arrow keys
and confirm by pressing
the
OK
button to switch over to the selected input.
In doing so note sections 6.2.1 - 6.2.3 of the quick start manual.
6.4 Channel/source information
6.4.1 Info box
An Info box appears on the screen for the set period every time you change channels.
The channel slot and name as well as the source of the channel selected, the channel list in
which the channel is located and the title of the current programme with the start/end time
and the progress bar, as well as further channel information (e.g.
for teletext,
for 16:9
transmissions,
for subtitles,
for encrypted channels or
for Dolby Digital broadcasts)
are shown in this Info box.
The progress bars are coloured yellow according to the amount of transmission time
already expired for the current programme. If the beginning of the progress bar is
coloured red the transmission started too early and if the end of the progress bar is
coloured red the current programme has overrun.
The current time is shown in the right-hand upper corner of the screen.
6.4.2 Displaying the clock and channel information
This function allows you to see channel information about the channel being watched.
>
Pressing the
Info
button allows the information mentioned in section 6.4.1 to be
displayed again for the set period.
6.5 Receiving encrypted channels
>
Insert the
CONAX
Smartcard into the card slot in the integrated card reader. (align the
gold-coloured chip forwards and in the direction of insertion)
or
>
Insert a CI-/CI+- module with the upper side pointing to the rear in the slot.
>
Insert the smartcard into the CI / CI+ module card slot.
6.5.1 Smartcard PIN code
With encrypted channels, programmes that are not suitable for children can be pre-blocked
by means of a parental control code/symbol. To unblock the specific programme it is
necessary to enter the Smartcard PIN code stored on the Smartcard.
>
To release the programme, use the
numeric keypad
to enter the 4-digit
Smartcard PIN code
.
