Techne PrimeQ Скачать руководство пользователя страница 81

Страница: 81 / 187

3.4.4.9

Browse for an existing plate layout

The user can browse for an existing plate layout file by clicking on the

Browse

button in the Plate

layout pane of the Experiment Editor.

This will open up the Plate Layout library folder and display any existing templates (.qpla files).

•

Highlight a file and click

Open

to open up the plate layout file
in Experiment Editor. The
template is ready for use.

3.4.4.10 Edit a plate layout

A plate layout already present in the Experiment Editor can be edited simply and easily by clicking
the

Edit

button in the Plate Layout pane of the Experiment Editor. Clicking on

Edit

takes the user

back into the Plate Layout Editor and allows any of the plate layout settings to be changed either
before or after the run.

•

Click

Done

to return to the Experiment Editor and the edited plate layout will appear in the

Plate Layout pane.

3.4.4.11 Create a new plate layout from the Home page

Clicking on

Create a New Plate Layout

from the Home Page provides a quick link through to the

Plate Layout Editor. Define the plate layout for each sample type and edit the well information as
detailed in section 3.4.4.

3.4.4.12 Saving a plate layout to the library folder

The plate layout file can be saved at any point during the setup using typical Windows commands.

However, if the padlock icon in the top-left of the Editor screen is locked, the current file
in use is designated

read only

. This provides a useful tool to protect against the

accidental over-writing of files meaning that this file would have to be saved under a
different file name.

This function can be turned off by simply clicking the padlock icon or by choosing the

File

option in

the menu bar and clicking on

Lock

•

On the menu bar in Plate Layout Editor, select

File

and then

Save As…

Содержание PrimeQ




























































































































































































Результаты поиска

Содержание PrimeQ

Отзывы:

Похожие инструкции для PrimeQ

Бренды по названию

Популярные бренды

Techne PrimeQ, Руководство оператора

Результаты поиска

Содержание PrimeQ

Отзывы:

Похожие инструкции для PrimeQ

Бренды по названию

Популярные бренды