6-43
EO18-33003A
6. DIAG. TEST OPERATION
6.4 TEST PRINT MODE
■
Auto paper feed
At a test print with the cut mode being specified, the auto paper feed (advancing the paper four about
10 mm to prevent the leading edge of the paper from winding onto the platen) is performed after
printing or feeding. The following table shows whether or not the auto paper feed and auto reverse
feed is performed after changing the test print mode to the following mode:
NOTES: 1. Even if the auto paper feed has been performed in online mode, an auto reverse feed is
not performed when starting a test print.
2. Even if the auto paper feed has been performed in test print mode, an auto reverse feed
is not performed in online mode.
3. After a self diagnosis print, an auto reverse feed is not performed for printing the first paper
in online mode.
4. After the print head is raised and lowered, the auto paper feed is canceled.
Issue mode
Auto
paper feed
Auto reverse feed
Batch
None
Performed if the paper has been advanced.
Cut
Performed
Performed if the paper has been advanced.
Strip
None
None (even if the paper has been advanced.)
Self diagnosis print
None
None (even if the paper has been advanced.)
