3-22
EO18-33003A
3. INSTALLATION PROCEDURE FOR THE OPTIONAL EQUIPMENT
(Revision Date: Jan. 23, 2001)
3.7 STRIP MODULE (B-7904-H-QM)
17) Secure the strip module with the enclosed PT-3x8 screw to the printer.
Fig. 3-45
Printer
PT-3x8 Screw
Strip Module
18) Unhook the strip lever by pushing it, and open the strip module.
19) Put aside the strip sensor harness (black) and the ground wire to attach the strip plate L to the
frame base with the enclosed PT-3x8 screw. Ensure that the strip plate L holds the plate behind
the hook plate L.
Strip Module
PT-3x8 Screw
Strip Plate L
Hook Plate L
Strip Sensor Harness (Black) and Ground Wire
Strip Lever
20) Take out slack of the strip sensor harness (black) and the ground wire by pulling them from the
CPU PC board side.
CAUTION:
Do not pull the harness too strong. Damaged harness may cause a machine failure.
Fig. 3-46
Fig. 3-47
Strip Module
Strip Sensor Harness
(Black) and Ground Wire
Strip Module