manualshive.com logo in svg

Team Losi XXX-NT AD2, Руководство пользователя

Владельцы Team Losi XXX-NT AD2 могут бесплатно загрузить руководство по эксплуатации на нашем веб-сайте. Это пользовательское руководство доступно для скачивания и представляет собой ценный ресурс для обслуживания и настройки вашего автомобиля. Подробная информация о продукте доступна на {веб-сайте}.

Поделиться
Скачать
background image

1. INTRODUCTION ..................................................................... i

Completed Kit Dimensions .................................................... i

Notes & Symbols .................................................................. i

Kit Manual Organization ....................................................... i

Important Safety Notes ......................................................... i

Tools Required ...................................................................... i

Radio/Electrical ..................................................................... ii

Hardware Identification ........................................................ ii

Fuel ....................................................................................... ii

Fuel Bottle ............................................................................ ii

Starters ................................................................................. ii

Glow Igniter .......................................................................... ii

2. BAG A .................................................................................. 1-2

3. BAG B .................................................................................. 3-7

4. BAG C ................................................................................ 8-12

5. BAG D ............................................................................... 13-15

6. BAG E ................................................................................ 16-27

7. BAG F ................................................................................ 28-31

8. BAG G ............................................................................... 32-33

9. BAG H ............................................................................... 34-40

10. BAG I ................................................................................. 41-52

11. Final Checklist ....................................................................... 53

12. Tips from the Team ............................................................ 54-56

13. Spare Parts ........................................................................ 57-60

ii

RADIO/ELECTRICAL

A suggested radio layout is provided in this manual.  Your high performance R/C center should be consulted regarding specifics on radio/
electrical equipment. However, we recommend using a steering servo with a minimum of 50 oz-in of torque.

HARDWARE IDENTIFICATION

When in question, use the hardware identification guide in each step.  For screws, the prefix number designates the screw size and number of
threads per inch (i.e., 4-40 is #4 screw with 40 threads per inch of length).  The fraction following designates the length of the threads for Cap
Head and Button Head Screws, and the overall length for flathead screws.  Bearings and bushings are referenced by the inside diameter x
outside diameter.  Shafts and pins are diameter x length.  Washers are described by inside diameter or the screw size that will pass through the
inside diameter. E-clips are sized by the shaft diameter that they are attached to.

FUEL

The fuel used to power the this truck is a special blend of methanol, oils, and nitromethane. This fuel is highly flammable and should be treated
with extreme caution. Be sure to read any warnings and cautions that appear on the packaging of the fuel. Because exhaust fumes are produced
from running fuel powered models, this truck should not be operated indoors. Be careful when handling your truck while the Engine is running.
Avoid pointing the exhaust outlet towards your face.  The exhaust fumes can cause irritation and burning of the eyes.

There are a number of different brands of model fuels available. We have found that fuels specially blended for R/C car use like Blue

Thunder, White Lightning, and Trinity perform Best. Team Losi does not recommend using common model airplane or helicopter fuels. Model
airplane fuels usually do not have the proper type or amount of oil needed for the extreme demands of R/C car racing.

FUEL BOTTLE

You will need some sort of a fuel bottle in order to fill the tank with fuel. Your local hobby shop should have fuel bottles and any other
accessories you may need.

STARTERS

This kit is designed for non-pull start engines. You will need to have some sort of an electric starter in order to start the engine. Team Losi has
developed a starter box especialy for the XXX-NT AD2 platform, LOSA99060. When attempting to start the engine in your XXX-NT AD2 truck
with an electric starter, make certain that the engine is being turned the correct direction (counter-clockwise when looking at the front of the
engine). Turning the engine over the wrong direction will cause the engine to not start or possibly run backwards.

GLOW IGNITER

You will also need a glow plug igniter in order to start the engine in your XXX-NT AD2 truck. There is a wide variety of glow plug igniters
available. Check with your local hobby shop.

Team Losi is continually changing and improving designs; therefore, the actual part may appear slightly different than the illustrated part. Illustrations of parts and
assemblies may be slightly distorted to enhance pertinent details.

TABLE OF CONTENTS

Содержание XXX-NT AD2


































































Отзывы:

Нет отзывов

Похожие инструкции для XXX-NT AD2

Jamara Pagani Zonda R Instructions Manual preview
Pagani Zonda R
Бренд: Jamara Страницы: 8
Carson Climb Warrior 3.0 Instruction Manual preview
Climb Warrior 3.0
Бренд: Carson Страницы: 44
K'Nex Education 78061 Quick Start Manual preview
78061
Бренд: K'Nex Education Страницы: 2
Cen Matrix TR Arena Manual preview
Matrix TR Arena
Бренд: Cen Страницы: 16
Cen GSR 5.0 Manual preview
GSR 5.0
Бренд: Cen Страницы: 32
Yokomo YD-2S Manual preview
YD-2S
Бренд: Yokomo Страницы: 32
Jamara 405300 Instruction Manual preview
405300
Бренд: Jamara Страницы: 12
Peg-Perego Adventure FI000202G33 Use And Care Manual preview
Adventure FI000202G33
Бренд: Peg-Perego Страницы: 28
Peg-Perego DUCATI GP Use And Care Manual preview
DUCATI GP
Бренд: Peg-Perego Страницы: 52
PACIFIC CYCLE KT1246 Owner'S Manual preview
KT1246
Бренд: PACIFIC CYCLE Страницы: 22
Hobbico RALLY CAR FPV Manual preview
RALLY CAR FPV
Бренд: Hobbico Страницы: 4
Peg-Perego Gator XUV Use And Care Manual preview
Gator XUV
Бренд: Peg-Perego Страницы: 20
Jamara Tiger EP BL 2,4 GHz Instruction preview
Tiger EP BL 2,4 GHz
Бренд: Jamara Страницы: 32
Famosa Feber Xtreme Raider Quick Start Manual preview
Feber Xtreme Raider
Бренд: Famosa Страницы: 2
WARCRADLE SCENICS Dunsmouth Traders' Gear Assembly Manual preview
Dunsmouth Traders' Gear
Бренд: WARCRADLE SCENICS Страницы: 8
Monogram '66 SHELBY GT350 Manual preview
'66 SHELBY GT350
Бренд: Monogram Страницы: 8
Jamara 404521 Instruction Manual preview
404521
Бренд: Jamara Страницы: 8
ZEROTRIBE T4 MID Conversion Kit Instruction Manual preview
T4 MID Conversion Kit
Бренд: ZEROTRIBE Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды