Front Panel
4
TEAC DVD-R/-RW Drive User’s Manual
Front Panel
Figure 2 illustrates the front panel of the DVD-R/-RW drive.
Figure 2. Front Panel of the DVD-R/-RW Drive
disc tray:
Use the disc tray to load discs into the drive. You can open or close
the tray by pressing the Eject button.
headphone jack:
You can connect headphones or external speakers to this
jack to listen to an audio CD being played on your TEAC drive. Use a 3.5mm
stereo mini-plug. To connect external speakers to this jack, you can connect
a stereo adapter to split the output into separate cables for the left and right
channels. Such adapters convert a male stereo mini-jack to two female phono
jacks. Audio output from the rear panel is active even when a connector plug
is inserted into the headphone jack.
emergency eject mechanism:
If the eject button fails, you can
turn off the
power to the DVD-R/-RW drive,
then
insert a small, thin rod (such as a
straightened paper clip) into the emergency eject mechanism opening and
press firmly to eject the disc.
Note:
TEAC strongly recommends that you do not push the tray in to close
it. Please press the Eject button to eject or retract the tray.
disc tray
headphone jack
volume control
eject button
LED status indicator
emergency eject mechanism opening
Caution:
Do not attempt to use the emergency eject mechanism when
the LED indicator is lit or you may seriously damage the disc or
the DVD-R/-RW drive.
TEACdvd-r/rw.book Page 4 Wednesday, January 22, 2003 3:47 PM
