Teac CR-H100, Руководство пользователя

Страница: 10 / 52

ENGLISH
10
LINE OUT
LINE
OUT
REMOTE
CONTROL
LINE
IN
LINE
OUT
REMOTE
CONTROL
DIGITAL
IN
LINE
IN
L R
L R L R
L R L R
C A A
A A B
B
MD DECK (MD-H100)
CR-H100
VCR, DVD PLAYER, ETC.
CASSETTE DECK (R-H100)
Connection
How to connect external sources.
< Turn off the power of all the equipment
before making connections.
< Read instructions of each component you
intend to use with the CR-H100.
PLAY/REC jacks
< Make sure to connect :
< Be sure to insert each plug securely. To
prevent hum and noise, do not bundle the
connection cords with the power cord or
speaker cord.
REMOTE CONTROL jacks
If you have TEAC R-H100 or MD-H100,
convenient system control operations and
AI direct play functions are possible;
< By pressing the POWER button of CR-
H100, you can switch ON/standby all the
unit connected by remote control cords.
< When you press the PLAY button( y ) of
R-H100 or MD-H100 , the input selector of
the CR-H100 is set to "TAPE" or "MD"
automatically.
< When you select "TAPE" or "MD" with the
input selector of the CR-H100, the tape or
MD will be played automatically.
< When you turn on the system, the source
that was selected last time will start
playback automatically.
Connect the REMOTE CONTROL jack(A or
B) to the REMOTE CONTROL jack(A or B)
of R-H100 or MD-H100 by a remote control
connection cord.
B
A
DIGITAL OUT terminal
Use this terminal to connect to DIGITAL IN
terminal of a digital component (such as a
MD deck, digital amplifier, or DAT deck).
<
Connect the component through the
DIGITAL IN terminal with an optical cable.
<
When making a digital connection, remove
the caps from the terminals. When you
don't use the terminals, Ieave the caps in
place.
C
L
white
red
R
L
R
white
red
white
red
white
red