409-32034
Rev D
29 of 31
2. Remove the control panel from the machine and pivot it in order to view the control board.
3. Insert the small end of the air feed cable assembly (see Customer Drawing 1424266) into the J7
socket. See Figure 20.
4. Install the control panel into the machine with the air feed cable assembly through the upper right
hand slot in the machine frame. See Figure 20.
Figure 20
5. Remove the two bolts securing the rear of the left sheet metal guard.
6. Install Air Feed Bracket 1338977-1 to the frame using the two bolts securing the sheet metal guard.
7. Prepare the baseplate assembly as follows:
a. For Air Feed Kit 1424266-1 (standard machine base plate), install the socket head screw and rear
stop to the baseplate as shown. Then remove the back left baseplate clamp.
b. For Air Feed Kit 1424266-2 (universal machine base plate), install the socket head cap screw and
Air Feed Clamp 1338963-1. Then remove the back left baseplate clamp.
8. Install the air feed applicator onto the baseplate.
Diode
Manual Overide
Double Acting
Air Cylinder
Spring Return
Air Cylinder
Connection
Valve Lockout
Bolt Securing
Guard
Rear Panel
Mounting Bolts
Air Feed
Cable
Assembly
Insert Small End of Air
Feed Cable Assembly
into the J7 Socket
