409-10204
Rev G
9
of 23
3.2.
Installation
Remove all mounting bolts securing the machine to the shipping pallet. Install lift ring (see Figure 7) on top of
the machine.
NOTE
Lift ring (M1220 eye bolt) is customer supplied.
CAUTION
Install the lift ring carefully. A 19.05-mm [.75-in.] thread length engagement is required for the lift ring to support the machine.
Attach a suitable hoist to the lift ring, lift the machine, and place it in the selected operating location.
Insert the reel support post into the appropriate hole on top of the machine until the roll pin engages a groove in
the machine frame.
Figure 7
Attach the terminal strip guide included with the machine with the two thumbscrews supplied. Mount the guide
on the left guard for side-feed applicators. Mount the guide on the right guard for end-feed applicators.
Connect the power cord to a suitable electrical supply.
NOTE
The machine will automatically detect the supply voltage and adjust the controller accordingly.
Lift point for the equipment.
Base Plate Assembly
Hole for Customer
Supplied Lift Ring
Tongue Operated
Safety Switch
Содержание AMP 3K/40
Страница 7: ...409 10204 Rev G 7 of 23 Figure 5...
