409-32048
Rev A
17
of 64
Figure 14
“Height Action”
-
This defines the action to be taken when the height at this step is reached Actions are
selected from the drop down menu shown in Figure 15. The available actions are:
Figure 15
—
Next Step -
This directs the process to the next step below.
—
Go To -
This directs the process to continue at any step below. The step number is entered from the
keyboard.
—
Complete -
This signals that the pressing process is complete. The head will stop immediately and rise
to the next tool clearance height.
—
Error 1 - 8 -
These are user defined error messages. If the height is reached and the action is an error.
The pressing process is immediately halted and the error message is displayed on the screen. The
operator must acknowledge the error message to continue.
“Force”
-
This defines the force which will trigger the force action. It is used to detect force errors and to
define cycle completion based on the force generated. There are four variable choices provided on the
drop down menu. Alternatively, an actual force can be entered from the keyboard. See Figure 16.
Figure 16
—
PARS-FPPL xx% -
This is a dynamic press cycle termination based on actual forces generated during
the pressing process). PARS Help button will produce the picture shown in Figure 17.
Figure 17
