409-32048
Rev A
56
of 64
Figure 58
Joystick: X / Y /Z Position points
The Joystick pad and associated controls remains the same on the right-hand side.
This screen allows you to create preprogrammed X / Y / Z positions that, with the appropriate
button push, will bring you to the correct coordinates. The safety feature is the
Move
button; you
activate the desired position but the Press Head will not move until the
Move
button is depressed.
New preprogrammed buttons are created by depressing the
New Point
button and then clicking
on the
Set Current
button for where you are at the present moment or typing in the X / Y / Z
coordinates that you desire. Assign a name to your new point coordinates and depress the
Save
button.
