Seite 77 / 121 ECOC: EGC0 ; LOC: AI
528008-4
412-94096 Rev.B3
WARNING!
Before starting work, the entire crimping machine must be checked for damage and
leaks.
Regular cleaning and servicing of the externally accessible components will maintain the operating state
of the machine. Do not use fabric-based materials such as cleaning rags to clean the machine. The
machine and its component parts must not be cleaned with compressed air. The crimping machine and
its component parts must not be cleaned with hard objects such as scrapers, steel wool etc.. Large scale
contamination and abrasion must be suction cleaned.
Service work
Service interval
Lubricant
Regular cleaning and servicing of the externally
accessible components will maintain the operating
state of the machine.
Daily
Check the oil level in the reservoir weekly. If any oil
has been lost, top it back up to the higher level.
Weekly
See chapter 6.5
Lubricate the tool guide bolts
Weekly
Blaser Swiss Lube
part no. 00492-01
EP universal
grease
Check each month for possible discolouring of the oil:
-
milky white oil indicates water content,
==> Oil must be replaced immediately.
-
Oil has darker colour, rust in oil,
==> Oil must be replaced over the next few
days.
Monthly
See chapter 6.5
The oil and the oil filter should be replaced at the latest
after 4000 service hours or 2 years.
Every 4000 service
hours
or after 2 years
See chapter 6.5
Clean the tools with a brush
Daily
