Seite 59 / 121 ECOC: EGC0 ; LOC: AI
528008-4
412-94096 Rev.B3
1
2
- Remove the screw plug (Fig. 7.02-7.04)
- Place the vent cap on the hydraulic reservoir filler plug.
Item
Description
1 ...... Screw plug
2 ...... Vent cap
- Place the two-hand mechanism on the bench in front of the machine or bolt the two-hand mechanism to
the edge of the bench. Ensure that the operating position remains ergonomic.
- Make sure the workstation is adequately lit. The machine does not have its own light source.
NOTE:
When the operator is positioned correctly in front of the crimping machine, his hands
should rest comfortably on the two-hand mechanism.
CAUTION!
•
Route the hoses and cables along the ground so that they cannot be tripped over.
•
Access to the machine’s control devices must be kept clear. This applies in
particular to the two-hand mechanism, the reset button and the main switch.
•
Wear suitable safety shoes for shipping and erecting the machine and/or the
hydraulic unit.
Fig. 10.02
Fig. 10.03
Fig. 10.04
