User manual TBK-NVR5004 TBK-VISION PLUS
46
www.tbkvision.com
11.6
Other Settings (DDNS)
The setting steps are as follows:
①
Enable DDNS server and then select the DDNS server type, available:
www.hommax-ddns.com
,
www.dyndns.com
, www.no-ip.com.
①
Enter user name, password and host domain name of the registered website.
②
Click “Test” button to test the effectiveness of the relevant information.
③
Click “Apply” button to save the setting.
Note: The domain name selected by user is a banding domain name of the NVR. User should
logon the website provided by the server supplier to register a user name and password and
then apply for a domain name online. After the successful application, user can access the
device from the IE client by inputting that domain name.
Note: It is necessary to configure the network parameters
IP Address, Subnetmask and
Gateway
Note: It is necessary open NVR pots, by default 6036 and 80.
Note: Do not forget to configure DNS (prefered and alternate)
UPnP settings:
You can use UPnP function to enable the fast connection of the device to WAN via router
without port mapping. Before setting UPnP, please configure the correct local IP address,
subnet mask, gateway and DNS according to the router. Make sure the HTTP port and data
port are correctly set. Make sure the router supports UPnP function.
Please enable UPnP both in the NVR and the router.
