User manual TBK-NVR5004 TBK-VISION PLUS
39
www.tbkvision.com
To set up preset:
①
In the Advanced interface, click preset “Setting” button to see a dialog box.
②
In the preset setting tab, enable preset, set the preset name and then click preset
“Setting” button.
③
Control the dome by rotating up, up left, down, right down, left, left down, right and up
right and adjust the rotate speed and the value of zoom, focus and iris of the dome.
④
Select the serial number of the preset point. Click
button to enable the PTZ wiper
and click
button to enable the PTZ light.
Note: PTZ must support wiper and light button and these two buttons are just
