Quit
Troubleshooting
Excessive mix leakage from the
bottom of the door spout.
Cause: Worn, missing, or incorrect o-ring is
on the draw valve.
Remedy: Check the o-rings (replace every 3
months).
Cause: Improper lubrication on the draw valve
o-rings.
Remedy: Lubricate properly.
Excessive mix leakage into the rear
drip pan.
Cause: Worn or missing drive shaft seal.
Remedy: Install or replace the seal.
Cause: Improper lubrication of the drive shaft.
Remedy: Lubricate properly.
Cause: Worn rear shell bearing.
Remedy: Call an authorized service technician
to replace the rear shell bearing.
Cause: The gear box is out of alignment.
Remedy: Call an authorized service technician
to align the gear box.
Содержание Turbo Charge 8752
