Quit
Troubleshooting
No product is being dispensed.
Cause: Machine is unplugged.
Remedy: Plug machine into the wall receptacle.
Cause: The power switch is in the OFF position.
Remedy: Place the power switch in the ON
position and press the AUTO key.
Cause: Low on mix. The MIX OUT light is on.
Remedy: Add mix to the mix tank and press the
AUTO key.
Cause: The beater motor is out on reset.
Remedy: Reset the freezer.
Cause: Circuit breaker is off or the fuse is
blown.
Remedy: Turn the breaker on or replace the
fuse.
Cause: The mix probe was not installed
properly, or is damaged.
Remedy: Check the mix probe installation.
Cause: Restriction in the door spout.
Remedy: Disassemble and clean the freezer.
Never put objects or fingers in the door spout.
Cause: Insufficient mix in the freezing cylinder.
Remedy
: Refer to “Insufficient mix in the
freezing cylinder” section of troubleshooting.
Cause: The beater assembly is rotating
counterclockwise.
Remedy: Contact an authorized service
technician to correct the rotation (clockwise).
Содержание Turbo Charge 8752
