manualshive.com logo in svg

Taylor 811 series, Руководство оператора

Поделиться
Скачать
Taylor 811 series Скачать руководство пользователя страница 5

Section 1

1-1 

Model 811, 813, 819, 821 Series 

To the Installer 

1

To the Installer

The following information has been included in the 
manual as safety and regulatory guidelines. For complete 
installation instructions, please see the Installation 
Checklist.

Installer Safety

IMPORTANT!

 In all areas of the world, 

machines should be installed in accordance with existing 
local codes. Please contact your local authorities if you 
have any questions.

Care should be taken to ensure that all basic safety 
practices are followed during the installation and 
servicing activities related to the installation and service 

of Taylor

®

 machines.

•

Only Taylor service personnel should perform 

installation, maintenance, and repairs on Taylor 
machines.

•

Authorized service personnel should consult 

OSHA Standard 29CFRI910.147 or the 
applicable code of the local area for industry 
standards on lockout/tagout procedures before 
beginning any installation or repairs.

•

Authorized service personnel must ensure that 

the proper personal protective equipment (PPE) 
is available and worn when required during 
installation and service.

•

Authorized service personnel must remove all 

metal jewelry, rings, and watches before 
working on electrical equipment.

DANGER!

 The main power supply(s) to the 

freezer must be disconnected prior to performing any 
repairs. Failure to follow this instruction may result in 
personal injury or death from electrical shock or 
hazardous moving parts as well as poor performance or 
damage to the machine.

Note:

All repairs must be performed by a Taylor service 

technician.

WARNING! 

This machine has many sharp 

edges that can cause severe injuries.

Site Preparation

Review the area where the machine will be installed 
before uncrating the machine. Make sure all possible 
hazards to the user or equipment have been addressed. 
Fill out the store survey form.

 WARNING

! Only install this machine in a 

location where its use and maintenance is restricted to 
trained personnel. Failure to comply may result in 
personal injury.

Electrical Connections

The grill is supplied with one power cord. Check the data 
plate on the grill for voltage, cycle, phase, and electrical 
specifications.

For proper power connections, refer to the wiring 
diagram provided inside the left-side panel, attached to 
the gas manifold assembly. The power connection is 
located behind the access line cover on the front of the 
grill.

In the United States, this equipment is intended to be 
installed in accordance with the National Electrical Code 
(NEC), ANSI/NFPA 70-1987. The purpose of the NEC 
code is the practical safeguarding of persons and 
property from hazards arising from the use of electricity. 
This code contains provisions considered necessary for 
safety. Compliance therewith and proper maintenance 
will result in an installation essentially free from hazard!

In all other areas of the world, equipment should be 
installed in accordance with the existing local codes. 
Please contact your local authorities.

The proper wire size and branch circuit overcurrent 
device shall be selected according to the data label 
information and in accordance with CEC Part I 2006, 
Section 14-100(e)(i).

FOLLOW YOUR LOCAL ELECTRICAL CODES!

 

Содержание 811 series



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды