OPERATING PROCEDURES
6-17
Model 811, 813, 819, 821 Series
Operating Procedures
6
11. Use the wiper squeegee to push residual grease into
the grease cans.
Figure 6-51
12. Remove, empty, and re-install the grease cans.
Figure 6-52
13. Using an approved high-temperature grill cleaner,
pour approximately 3 oz. (90 mL) onto each 12 in.
(305 mm) cook zone.
Figure 6-53
14. Firmly attach the non-abrasive pad to the grill
cleaning pad holder.
IMPORTANT!
Use the grill cleaning pad and
holder identified on page 4-6 ONLY. Using any other pad
and holder will damage the release sheets.
15. Dip the pad into the grill cleaner.
Important!
Do not scrub while applying grill cleaner in
the following steps.
16. Apply grill cleaner to the front side of the upper
platens.
Figure 6-54
17. Apply grill cleaner to the bottom of the platen
handles.
Figure 6-55
NOTICE! DO NOT
use metal scrapers,
abrasive pads, screens, or wire brushes. Damage to
components may result.
14506
14586
14407
!
14631
14632
!
Содержание 811 series
