manualshive.com logo in svg

Taylor 811 series, Руководство оператора

Поделиться
Скачать
Taylor 811 series Скачать руководство пользователя страница 29

OPERATING PROCEDURES

6-7 

Model 811, 813, 819, 821 Series 

Operating Procedures 

6

After the product has been turned, the Standby button will 
need to be pressed to bring the platen back down. Once 
it reaches the next set gap, the product will then cook for 
another 60 seconds. After that time has expired, the 
platen arm will raise all the way up, and the product can 
be removed. 

Note:  

Each function is an accumulative timing sequence 

in seconds.

SEAR IN—30 seconds

TURN IN—30 seconds

REMOVE IN—60 seconds

Total cook time would be 120 seconds.

Alarm—AUTO/MANUAL: 

This key displays the current 

status of the alarm mode. Pressing the key toggles the 
mode to the opposite selection.

If AUTO is selected, the alarm will sound at the end of the 
cook cycle automatically and then stop after 5 seconds 
has elapsed.

Selecting MANUAL requires the operator to press 
anywhere on the display screen or the raise or standby 
buttons to stop the alarm.

SEC: 

This key displays the time associated with that 

menu item in seconds. To increase or decrease the 
seconds setting, press and hold the up and down arrow 
keys.

Gap: 

Each timing function has an associated gap setting. 

This setting can be changed selecting the gap value. 
Press and hold the up and down arrow keys to increase 
and decrease the gap value.

Upon completion of all programming selections, save the 
selections by pressing the OK key. To return to the main 
display screen without saving the programming 
selections, press the EXIT key.

Service Contact Information Key

Press the Service Contact Information key to view the 
programmed service contact information.

Figure 6-20

Language Key

The Language key is used to select the language the 
control will display. The available languages are English, 
French, Portuguese, Russian, and Spanish. See 
Figure 6-23.

Standby Alert—YES Key

Pressing this key toggles between YES and NO. If Yes is 
selected, an alert will sound when the platen has not 
been used for a cook cycle or placed into the Standby 
mode for a predetermined amount of time. See Standby 
Alert Timer. If NO is selected, the platen can still be 
placed into the Standby position, but there will be no set 
timing function associated with it.

Note:  

This function should be used to help conserve the 

energy cost of running the grill during slow times.

View Help Key

The View Help key is not functional at this time (future 
development).

131026

Содержание 811 series



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды