background image

2-2  

TO THE OPERATOR

Models 345, 346, 349, 355 

To the Operator 

Compressor Warranty Disclaimer

The refrigeration compressor(s) on this machine are 
warranted for the term stated in the Limited Warranty 
section in this manual. However, due to the Montreal 
Protocol and the U.S. Clean Air Act Amendments of 
1990, many new refrigerants are being tested and 
developed, thus seeking their way into the service 
industry. Some of these new refrigerants are being 
advertised as drop-in replacements for numerous 
applications. It should be noted that in the event of 
ordinary service to this unit’s refrigeration system, only 
the refrigerant specified on the affixed data label should 
be used. The unauthorized use of alternate refrigerants 
will void your Taylor compressor warranty. It is the 
machine owner’s responsibility to make this fact known to 
any technician he or she employs.

It should also be noted that Taylor does not warrant the 
refrigerant used in its equipment. For example, if the 
refrigerant is lost during the course of ordinary service to 
this machine, Taylor has no obligation to either supply or 
provide its replacement either at billable or unbillable 
terms. Taylor does have the obligation to recommend a 
suitable replacement if the original refrigerant is banned, 
obsoleted, or no longer available during the 5-year 
warranty of the compressor.

Taylor will continue to monitor the industry and test new 
alternates as they are being developed. Should a new 
alternate prove, through our testing, that it would be 
accepted as a drop-in replacement, then the above 
disclaimer would become null and void. To find out the 
current status of an alternate refrigerant as it relates to 
your compressor warranty, call the local Taylor distributor 
or the Taylor factory. Be prepared to provide the model/
serial number of the machine in question.

Содержание 345

























































Отзывы: