TATA Motors Nexon EV 2003, Руководство пользователя, Страница: 79 / 308

70
tion.
Vehicle To Load Charging (V2L)
Vehicle Ignition OFF state
User can decide the discharge SOC 1.
limit of the vehicle and can preset the
SOC limit in infotainment before start-
ing the V2L function.
Since infotainment system won’t •
be awake in Ignition OFF state,
Limit can be set only in ignition ON
or Crank ON condition in the
previous cycle.
Discharge SOC Limit cannot be •
changed during the V2L function.
Incase if no limit is set by the user,
•
30% SOC will be consider as de-
fault discharge SOC limit
Make sure to keep the vehicle and the 2.
V2L adaptor in dry environment/in
shade
If the vehicle is in OFF state,
3.
Open/close the door or If vehicle is in
locked state Press RKE unlock button
and open the door to wake up the ve-
hicle control unit. Once wakes up, Ve-
hicle control unit will remains in
wakeup state for 120sec
Remove the V2L adaptor caps & con-
4.
nect the V2L adaptor gun to the source
vehicle within in 120sec of step 3.
Make sure park-brake/EPB is en-
5.
gaged.
If user couldn’t connect the V2L gun
6.
within 120sec of step 3, then remove
the Gun completely and repeat from
step 3
Connect external load to the V2L
7.
adaptor 3pin socket. Make sure that
Electrical loads are healthy/in good
condition and ensure the relevant ca-
bles and plugs of loads are connected
properly.
When using multiple loads make •
sure Total power consumption of
the loads should be lesser than
3.3Kw or total current demand of
loads should be lesser than 16A.
If the electric appliances demand
•
exceed the maximum power and
current capacity that the vehicle
can provide, V2L function will stop
from vehicle side
It is recommended to use home
•
appliances with Power factor
greater than 0.85
If multiple loads are connected on
•
extension box, it is recommended
to use extension box with MCB
(16A) & with M Type plug and
socket. The MCB switch needs to
be in switched off/ turned off condi-
tion
Press V2X switch with in 120sec of 8.
CHARGING