TATA Motors LP 613 EURO-II, Руководство оператора

Страница: 150 / 180

158
22. Check coolant level in
transparent auxiliary tank. Level
is acceptable if it is found
between mid and max.
23. Check for any leakages of
coolant.
24. Check functioning of all bulbs.
25. Check for proper functioning of
blinkers, horn, head lamp,
parking light, reverse light,
wiper system, washer system
etc.
26. Check tightness of electrical
connection at battery, starter
motor, alternator & starter relay.
27. Check all fuses .
28. Check all the earth points for
looseness.
29. Check for functioning of all
gauges / meters / warning
lamps.
30. Check connectors in all the
circuits.
31. Check for proper opening and
closing of doors .
32. Check functioning of door locks,
latches and windows.
33. Check for any complaints on
the cab fittings, instrument
panel, glove box etc.
34. Check and tighten hand loose
fasteners
35. Check for any breakages, bends,
failure of any component /
assembly / unit.
36. Any fouling between two
components which may lead to
leakages or other complaints.
Fouling of fuel lines, brake
pipes, clutch pipes, air intake
pipe, power steering hydraulic
pipe, clutch / brake linkages,
accelerator rod etc.
37. Lubricate with oil can linkages
and all other points as
recommended.
38. Grease with grease gun all the
points as recommended.
39. Check for proper functioning of
cab tilt mechanism.
40. Check for proper functioning of
front/rear fog lamps, Cab
heating mechanism etc.
(optional fitments).
7.2 PDI Service Recommendations