TATA Motors LP 613 EURO-II, Руководство оператора

Страница: 153 / 180

161
7.3 Service schedule
Service Recommendations
SR.
NO.
OPERATION
FREQUENCY
IN KM
DAIL
Y
Every 1,000 km
9,000-9,500 km
18,000-18,500 km 27,000-27,500 km 36,000-36,500 km 45,000-45,500 km 54,000-54,500 km 63,000-63,500 km 72,000-72,500 km
20. Remove strainer in fuel tank, clean and refit. Bleed the system. 36000 ● ●
21. Remove engine breather cap, clean in kerosene. Blow air from outlet pipe. Replace gasket, 9000 ● ● ● ● ● ● ● ●
if necessary. Check and replace rubber hose, if necessary.
22. Remove injection nozzles. Test pressure and spray characteristics on nozzle testing equipment. 36000 ● ●
Do not disassemble nozzle, if found correct.
23. Drain cooling system - reverse flush. Refill system with fresh coolant. Add recommended quantity
320000 kms or 2 years whichever is earlier.
of anti freeze agent in specified ratio.
24. Replace radiator rubber hoses. 72000 ●
25. Remove and clean exhaust outlet elbow, exhaust butterfly valve, shaft and refit. (Do not lubricate). 72000 ●
26. Check engine for trouble-free operation (colour of exhaust gases and nozzle operation). 18000 ● ● ● ●
27. Check end play of turbo charger shaft & radial clearance between turbine wheel & housing (Euro II). 72000 ●
C L U T C H
1. Check level of clutch fluid in plastic containers. 9,000 O
● ● ● ● ● ● ● ●
Top up if necessary.
2. Check clutch pedal free play and adjust if necessary. (For highway operation vehicles, this check to 9,000 O ● ● ● ● ● ● ● ●
be done more often).
3. Remove grease cup for lubricating clutch release bearing. Replace 3/4 full with grease and tighten 9,000 ● ● ● ● ● ● ● ●
by a few turns.
4. Lubricate with oil can-clutch pedal pivot pins. 9,000 O ● ● ● ● ● ● ● ●
5. Tighten if necessary. Mounting of clutch master cylinder and slave cylinder. 9,000 ● ● ● ● ● ● ● ●