TATA Motors LP 613 EURO-II, Руководство оператора

Страница: 71 / 180

71
1. Ensure that parking brake is
applied.
2. Move gear shift lever to neutral
position.
3. Insert ignition key in steering
lock cum ignition switch.
Steering wheel will be in locked
condition. Turn the key to “ACC”
position. Steering wheel gets
unlocked, and accessories will be
ON.
4. Turn the key further to ON
position. Lamp of battery
charging indicator, low oil
pressure will come on.
5. Do not press the accelerator
pedal. Turn the key further
clockwise to “START” position
(spring loaded) to operate starter
motor. As soon as engine starts,
release ignition key so that key
can come back to ON position
and starter motor disengages.
6. If engine misfires and stops, wait
for 2 minutes before operating
starter motor once again. This
practice should be strictly
adhered to, otherwise it will
damage starter motor.
7. Once engine starts, lamps of
battery charging indicator and
low oil pressure should go off.
8. Allow engine to warm up - until
cooling system temperature
reaches at least 40
o
C.
9. Release parking brake.
10. Now the vehicle is ready to
move.
3.1 Starting the engine Driving
Steering lock cum ignition switch-key
positions
Steering lock cum ignition key