TATA Motors LP 613 EURO-II, Руководство оператора

Страница: 75 / 180

75
3.3 Stopping the engine Driving
Operating instructions
1. Ensure air pressure in the system
is above 5 bar.
2. Change to lower gear
appropriate to road conditions.
Exhaust brake is very effective
below 40 kmph speed.
3. Do not depress clutch as this
would render exhaust brake
ineffective.
4. Press brake pedal fully when
vehicle is to be brought to a
stop.
Lubricating exhaust brake
linkages
1. Every 9,000 km. a few drops of
oil should be applied to ball pins
of outer linkages and friction
surface.
2. Butterfly valve shaft, which is
made of heat resistant material,
should not be lubricated,
since the lube oil would cause
seizing of the butterfly valve in
its housing.
Stopping the engine
After parking the vehicle in safe
place.
1. Release accelerator pedal.
2. Move gear shift lever to neutral
position.
3. Apply parking brake.
4. Turn ignition key to ACC
position. A timer will switch on
fuel stop solenoid for about 5
seconds which operates fuel
shut off valve and fuel supply is
cut off. Engine will stop. This shut
off timer is aborted in case you
turn ignition key again to ON
position within 5 seconds.
5. Turn the key to “lock” position.
6. Take out key from steering lock
cum ignition switch. Slightly turn
steering wheel clockwise or anti
clockwise (max. 180
o
), till click
sound is heard, to make sure that
steering wheel is locked.