TATA Motors LP 613 EURO-II, Руководство оператора

Страница: 34 / 180

30
D) WIPING SYSTEM
GUIDELINES FOR FITMENT OF WIPER
SYSTEM BY BODY BUILDERS
1. Wiper system components
(wiper motor, wheel box,
wiper arm and blade, linkages)
are supplied along with the
drive away chassis and these
are recommended for use on
the built up vehicle. However,
the windscreen and the
mounting of the wheel boxes
should be appropriately
decided to match wiper
system regulation as stipulated
in AISO 11-2001 for A, B, C
wiping zone area
requirements.
2. Wiper motor to be mounted
preferably near the centre of
the panel below the wind
screen with suitable mounting
bracket.
4. Wheel boxes to be fitted with
suitable mounting
arrangement on both sides, in
such a way that the wiping
pattern obtained meets the
regulatory requirements of
AISO11-2001.
5. The path of link rod
movement, during wiping
system operation, should be
free from any obstacles to
ensure free movement.
6. Wiper arm and blade
assembly should be properly
tightened on the wheel box
to ensure proper pressing of
rubber edge of blade against
the wind screen.
7. Wiper system should be
balanced and it is to be
ensured that there is no
possibility of entangling /
locking of linkages or fouling
of wiper blade with rubber
beading.
1.7 Additional provisions (electrical) General