Yamaha BANSHEE YFZ350R Скачать руководство пользователя страница 1

Страница: 1 / 168

YAMAHA MOTOR CO., LTD.

PRINTED ON RECYCLED PAPER

PRINTED IN JAPAN

2002·3–1.5

This ATV should not be ridden by anyone under 16 years of age.

OWNER’S MANUAL

5FK-28199-15

YFZ350R

READ THIS MANUAL CAREFULLY!

It contains important safety information.

LIT-11626-16-29

(E)

Improper ATV use can result in SEVERE INJURY or DEATH.

WARNING

ALWAYS USE

AN APPROVED

HELMET AND

PROTECTIVE GEAR

NEVER USE

ON PUBLIC

ROADS

NEVER CARRY

PASSENGERS

NEVER USE

WITH DRUGS

OR ALCOHOL

NEVER operate:

without proper training or instruction.

at speeds too fast for your skills or the
conditions.

on public roads - a collision can occur with
another vehicle.

with a passenger - passengers affect
balance and steering and increase risk
of losing control.

ALWAYS:

use proper riding techniques to avoid
vehicle overturns on hills and rough
terrain and in turns.

avoid paved surfaces - pavement may
seriously affect handling and control.

EBU00438

LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS.

(For replacement manual, call 1-800-532-1558)

Содержание BANSHEE YFZ350R









































































































































































Результаты поиска

Содержание BANSHEE YFZ350R

Отзывы:

Похожие инструкции для BANSHEE YFZ350R

Бренды по названию

Популярные бренды

Yamaha BANSHEE YFZ350R, Руководство пользователя

Результаты поиска

Содержание BANSHEE YFZ350R

Отзывы:

Похожие инструкции для BANSHEE YFZ350R

Бренды по названию

Популярные бренды