manualshive.com logo in svg

Yamaha BANSHEE YFZ350R, Руководство пользователя, Страница: 77 / 168

Поделиться
Скачать
Yamaha BANSHEE YFZ350R Скачать руководство пользователя страница 77

Exhaust system

The exhaust system on the ATV is very hot
during and following operation. To prevent
burns, avoid touching the exhaust system.
Park the ATV in a place where pedestrians or
children are not likely to touch it.

7-15

POTENTIAL HAZARD

Hot exhaust system.

WHAT CAN HAPPEN

Dry grass or brush or other combustible
material accumulated around the engine
area could catch fire. Someone touching
the exhaust system during or after oper-
ation could be burned.

q

WARNING

HOW TO AVOID THE HAZARD

Do not operate, idle, or park the ATV in
dry grass or other dry ground cover.
Keep the engine area free of dry grass,
brush, or other combustible material. Do
not touch the hot exhaust system. Do
not park the ATV in a place where others
might be likely to touch it.

 5FK-9-15-2  4/8/02 1:15 PM  Page 15

Содержание BANSHEE YFZ350R









































































































































































Отзывы:

Нет отзывов