TASCAM HS-2
85
Saving a playlist
The current playlist is saved in the current session (session
currently loaded) as a JPPA PPL file.
NOTE
After editing a playlist, save it as necessary. If you do
not save a playlist after editing, all changes will be lost
when, for example, you load another playlist, remove the
selected card, or turn off the unit's power. An “*” appears
in the file name or title name button when editing has
occurred but it has not been saved yet. When an “*” is
shown, a pop-up message asking if you want to save
the playlist will appear when you try to do something
that would clear the edits, including when loading
another playlist, creating a new playlist and changing the
operation mode.
1 Press the HOME key on the front panel to open the
Home screen.
2 Touch a file name or title name button to open
a pull-down menu and touch the
SAVE
button to
start saving the playlist.
While saving, a progress status pop-up appears.
When saving completes, the pop-up disappears.
NOTE
You can also save a playlist by touching the
MENU
button
on the
ASSIGN
file or
ENTRY
list screen to open a pull-up
menu and touching the
SAVE
button.
Entry List Screen
Assign File Screen
Naming a playlist and saving it
On the
ENTRY
List or
ASSIGN
File screen, after touching
the
MENU
button to open the pull-up, if you touch the
SAVE AS
button instead of the
SAVE
button, you can
name the playlist before saving it.
1 Press the HOME key on the front panel to open the
Home screen.
2 Touch a file name or title name button to open a
pull-down menu and touch the
SAVE AS
button.
The
PLAYLIST NAME
screen where you can input new
playlist names opens.
3 Input the playlist name. Follow the procedures in
“Editing the project name” on page 38.
4 Touch the
Enter
button on the
PLAYLIST NAME
screen or press the DATA dial to save the playlist
with this name.
While the file is being created, a progress status
pop-up appears.
When file creation completes, the pop-up disappears.
NOTE
When a file with the input name already exists, a pop-up
window to confirm whether you want to overwrite the file
is displayed.
Touch the
OK
button to overwrite the file. Touch the
CANCEL
button to return to the
PLAYLIST NAME
screen.
TIP
You can also name and save a playlist by touching the
MENU
button on the
ASSIGN
file or
ENTRY
list screen to
open a pull-up menu, and touch the
SAVE AS
button.
9–Playlist mode