Tascam HS-2 Скачать руководство пользователя страница 55

Страница: 55 / 132

TASCAM HS-2

Copying the data in the selected region

(Copy)

You can copy the selected region.

NOTE

• The copied data will be saved in the copy buffer.
• When the whole fade (in/out) area is included, the fade

information will also be retained.

&RS\ EXIIHU

6HOHFWHG UDQJH

1 Press the HOME key to display the Home Screen.
2 Touch the

EDIT MODE

button to enter the edit

mode.

3 Move the timeline cursor to the region to copy.
4 Touch the

SET/SELECT

button and select the re-

gion you want to copy using the

SET IN

SET OUT

and

SELECT Region

buttons on the pull-up menu.

5 Touch the

EDIT

button to display the pull-up menu.

6 Touch the

Copy

button on the pull-up menu. When

copying is complete, the Home Screen will be dis-

played after the pop-up window is displayed.

In this case, the

EDIT

pull-up menu will remain open.

Cutting the data in the selected region (Cut)

You can erase the selected region and move the following

data forward.

NOTE

• The data cut is saved on the copy buffer.
• When the whole fade (in/out) area is included, the fade

information will also be retained.

• When the IN point or OUT point is within the region,

the parts outside of the designated region will become

a new region.

• When the IN point or OUT point is set in the section of

fade-in / fade-out, the fade-in and fade-out information

will be deleted.

1 Press the HOME key to display the Home Screen.
2 Touch the

EDIT MODE

button to enter the edit

mode.

3 Move the timeline cursor to the region to cut.
4 Touch the

SET/SELECT

button and select the re-

gion you want to cut using the

SET IN

SET OUT

and

SELECT Region

buttons on the pull-up menu.

5 Touch the

EDIT

button to display the pull-up menu.

6 Touch the

Cut

button on the pull-up menu. When

cutting is complete, the Home Screen will be dis-

played after the pop-up window is displayed.

In this case, the

EDIT

pull-up menu will remain open.

7–Timeline mode

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 55 / 132

Результаты поиска

Содержание HS-2

Отзывы: