Tascam HS-2 Скачать руководство пользователя страница 105

Страница: 105 / 132

TASCAM HS-2

105

Copying a folder/file

1 Press the MENU key on the front panel to open the

screen.

2 Touch the

BROWSE

button to open the

BROWSE

screen.

SD card

3 Move to the media/folder containing a folder/file

to copy.

Folder:

Project01

Select a folder/file to copy.
The selected folder/file is highlighted in yellow.

4 Touch the

button to display the pull-up menu.

5 Touch the

COPY

button on the pull-up menu to

change to the copy destination folder selection

screen.

6 Move to the copy destination folder.

• The media selection screen appears for the first

copy. Touch the

button for the media containing

the copy destination folder.

First media selection screen

• The last displayed copy destination folder selection

screen appears the second time or later.

If a CF card was selected last time

NOTE

• While the copy destination is been selected, the

BROWSE

screen title changes to the blinking name

SELECT FOLDER"

• If the

CANCEL

button or

button is touched while

selecting a copy destination, the

BROWSE

screen

reappears.

7 Touch the

COPY

button to display a confirmation

message on the pop-up window. Touch the

but-

ton or press the ENTER key to copy.

To cancel copying or change the copy destination,

touch the

CANCEL

button.

NOTE

If the folder/file name already exists in the copy desti-

nation, the pop-up window

Cannot Copy Folder

Cannot Copy File

appears.

10–Internal settings

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 105 / 132

Результаты поиска

Содержание HS-2

Отзывы: