Tascam HS-2 Скачать руководство пользователя страница 60

Страница: 60 / 132

TASCAM HS-2

6 Touch the

Paste File

button after selecting a file

to paste on the

BROWSE

screen displayed.

7 Touch either the

Current Position

File T/C

button to start pasting when the pop-up window

to select the pasting position is displayed.

Then, select the

CANCEL

button to return to the

BROWSE

screen.

NOTE

If the selected file contains no time code information

when the F

ile T/C

button is touched, the file is pasted

at [ 00 h 00 m 00 s 00 f ].

NOTE

If you select a file from other than the current session

folder, the file is copied to the current folder and then

pasted.
A pop-up window showing

Cannot Copy.

is displayed

when a file with the same name exists in the current

session folder.
To change the file with the same file name, touch the

RENAME

button, or touch the

CANCEL

button to cancel.

8 When pasting is complete, the Home Screen will

be displayed after the pop-up window is displayed

and the

EDIT

pull-up menu is closed.

Setting Fade In/ Fade Out for the designated

region (Fade IN/ Fade Out)

You can set fade in/fade out for the designated region.

NOTE

The fade-in/fade-out ranges are indicated in light blue.
1 Press the HOME key to display the Home Screen.
2 Touch the

EDIT MODE

button to enter the edit

mode.

3 Move the timeline cursor to the end of fade in and

the beginning of fade out on the region where you

want to set fade in/fade out.

4 Touch the

Fade / Level

button to display the

pull-up menu.

• To set fade in, touch the

Fade IN

button.

• To set fade out, touch the

Fade Out

button.

5 When setup is complete, the Home Screen will be

displayed after the pop-up window is displayed.

In this case, the

Fade / Level

pull-up menu will

remain open.

7–Timeline mode

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 60 / 132

Результаты поиска

Содержание HS-2

Отзывы: