Tascam HS-2 Скачать руководство пользователя страница 27

Страница: 27 / 132

TASCAM HS-2

Setting the time of the built-in clock

1 Press the MENU key on the front panel to open the

screen.

2 Touch the

SYSTEM SETUP

button to open the

SYSTEM SETUP

screen.

3 Touch the

CLOCK ADJUST

tab to open the

CLOCK

ADJUST

page where you can set the built-in clock.

4 Touch the item that you want to change, and use

the DATA dial on the front panel to change the

value.

5 Touch the

SET

button or push the DATA dial to con-

firm the setting.

NOTE

After purchasing this unit, set the clock before making

your first recording. If you do not set the clock, the time

stamps on recorded files will be incorrect.

Lock function

Press the MENU key while pressing and holding the

HOME key on the front panel to open the

LOCK SETUP

screen where you can disable or enable operation from

the front panel and external devices.

The front panel is divided into two sections, which can be

locked and unlocked separately.
Types of external devices are also divided into two

categories, which can be locked and unlocked separately.
If you press the button for a section, it changes from

UNLOCK

LOCK

(with a yellow background) and the

locked area appears dimmed.

locked on LOCK SETUP

3−Preparation

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 27 / 132

Результаты поиска

Содержание HS-2

Отзывы: