Tascam HS-2 Скачать руководство пользователя страница 24

Страница: 24 / 132

TASCAM HS-2

Inserting and removing SD cards/ CF

cards

Inserting SD cards/ CF cards

Insert an SD card/ CF card into the SD card slot or CF card

slot on the front panel of the unit in order to use it for

recording and playback.

NOTE

SD cards / CF cards can be inserted whether the power

in ON or OFF.

1 Pull the card slot cover forward to open it.

2 Insert the SD card/ CF card with the correct

orientation.

With the labeled side up, insert the end with the

connector completely.

CF :

With the labeled side up, insert the connector end all the way
in until the card is firmly seated

SD :

With the labeled side up, insert the end with the exposed con-
tacts all the way in until the spring latch engages

3 Close the cover.

NOTE

If you cannot close the cover of the card slot, remove the

SD card and then reinsert the card. If you use CF card,

remove the CF card, press the square button to the right

of the slot and then reinsert the card.

Removing SD cards/ CF cards

Turn the unit OFF or stop operations before removing an

SD card/ CF card.

CAUTION

Never remove an SD card / CF card during recording,

playback or any other operation that accesses the SD card/

CF card. Doing so could, for example, cause recording

errors, loss of recorded DATA, and sudden loud noises to

be output through monitoring equipment, which could

result in damaged equipment and hearing loss.

1 Pull the card slot cover forward to open it.
2 In case of an SD card, press the card into the slot

slightly and release to bring the card out. In case

of a CF card, press the square button to the right

of the CF card slot to bring the button out. Press

the square button in again to partially eject the CF

card.

3 Pull the SD card/ CF card out by hand.

3−Preparation

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 24 / 132

Результаты поиска

Содержание HS-2

Отзывы: