Tascam HS-2 Скачать руководство пользователя страница 58

Страница: 58 / 132

TASCAM HS-2

7–Timeline mode

6 Touch the

Insert File

button after selecting a file

to insert on the

BROWSE

screen displayed.

7 Touch either the

Current Position

File T/C

button to start inserting when the pop-up window

to select the inserting position is displayed.

Then, select the

CANCEL

button to return to the

BROWSE

screen.

NOTE

If the selected file contains no time code information

when the F

ile T/C

button is touched, the file is inserted

at [ 00 h 00 m 00 s 00 f ].

NOTE

If you select a file from other than the current session

folder, the file is copied to the current folder and then

inserted.
A pop-up window showing

Cannot Copy.

is displayed

when a file with the same name exists in the current

session folder.
To change the file with the same file name, touch the

RENAME

button, or touch the

CANCEL

button to cancel.

8 When inserting is complete, the Home Screen will

be displayed after the pop-up window is displayed

and the

EDIT

pull-up menu is closed.

Inserting mute data into the designated

position (Insert Mute)

You can insert mute data into the designated position.

NOTE

• All regions following the IN point will move backward.
• When inserting into a region, the following two regions

will be generated: before the timeline cursor and after

the timeline cursor.

• When the designated position is located between

fade-in and fade-out, the fade-in and fade-out

information will be deleted.

1 Press the HOME key to display the Home Screen.
2 Touch the

EDIT MODE

button to enter the edit

mode.

3 Touch the

SET/SELECT

button and select the re-

gion where you want to insert mute data using the

SET IN

SET OUT

and

SELECT Region

buttons on

the pull-up menu.

4 Touch the

EDIT

button to display the pull-up menu.

5 Touch the

Insert Mute

button on the pull-up

menu. When mute insertion is complete, the Home

Screen will be displayed after the pop-up window

is displayed.

In this case, the

EDIT

pull-up menu will remain open.

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 58 / 132

Результаты поиска

Содержание HS-2

Отзывы: