Tascam HS-2 Скачать руководство пользователя страница 57

Страница: 57 / 132

TASCAM HS-2

Inserting the data of the copy buffer into the

designated position (Insert)

NOTE

• All regions following the positions inserted will move

backward by the time of the data inserted.

• When inserting into a region, the following three

regions will be generated: before the timeline cursor,

the content of the copy buffer, and after the timeline

cursor.

• When the designated position is located between

fade-in and fade-out, the fade-in and fade-out

information will be deleted.

&RS\ EXIIHU

1 Press the HOME key to display the Home Screen.
2 Touch the

EDIT MODE

button to enter the edit

mode.

3 Move the timeline cursor to the position where you

want to insert data.

4 Touch the

EDIT

button to display the pull-up menu.

Touch the

Insert

button on the pull-up menu.

NOTE

The

Insert

button is available only when the copy buffer

contains data.
5 When inserting is complete, the Home Screen will

be displayed after the pop-up window is displayed.

In this case, the

EDIT

pull-up menu will remain open.

Inserting the designated file into the desig-

nated position (Insert File)

You can insert the entire contents of a 2ch BWF file/WAV

file into the designated position.

NOTE

• All regions following the positions inserted will move

backward by the time of the file inserted.

• When inserting into a region, the following three

regions will be generated: before the timeline cursor,

the inserted file, and after the timeline cursor.

• When the designated position is located between

fade-in and fade-out, the fade-in and fade-out

information will be deleted.

EZI ILOH

1 Press the HOME key to display the Home Screen.
2 Touch the

EDIT MODE

button to enter the edit

mode.

3 Move the timeline cursor to the position where you

want to insert a file.

4 Touch the

EDIT

button to display the pull-up menu.

Touch the

Insert File

button on the pull-up menu

to open the

BROWSE

screen.

5 Touch the

button to select the media containing

a file to insert on the

BROWSE

screen.

NOTE

If the top page of the

BROWSE

screen is not displayed,

touch

on the screen. The media selection screen

appears.

7–Timeline mode

Содержание HS-2





































































































































Результаты поиска

Содержание HS-2

Отзывы:

Tascam HS-2, Руководство пользователя, Страница: 57 / 132

Результаты поиска

Содержание HS-2

Отзывы: