Tascam DP-008EX Скачать руководство пользователя страница 10

Страница: 10 / 92

TASCAM DP-008EX

1 – Introduction

About SD cards

This unit uses SD cards for recording and playback.
SD cards that meet SD/SDHC standards and are at

least 512 MB can be used with this unit.
A list of SD cards that have been confirmed for use

with this unit can be found on the TASCAM website

(http://tascam.com/). Please check this site or contact

TASCAM customer support.

Precautions for use

SD cards are delicate media. In order to avoid

damaging a card or the card slot, please take the

following precautions when handling them.

•

Do not leave them in extremely hot or cold places.

•

Do not leave them in extremely humid places.

•

Do not let them get wet.

•

Do not put things on top of them or twist them.

•

Do not hit them.

Precautions for installation

•

The unit’s nominal operating temperature is from

5º to 35º C (41º–95º F).

•

Do not install in the following types of places.

Doing so could degrade the sound quality or

cause malfunctions.

• Places with significant vibrations

• Near windows or other places exposed to

direct sunlight

• Near heaters or other extremely hot places

• Extremely cold places

• Places with high humidity or bad ventilation

• Dusty places

• Places directly exposed to rain or other water

•

Do not place this unit on top of a power amplifier

or other device that generates heat.

Beware of condensation

If the unit is moved from a cold to a warm place, or

used immediately after a cold room has been heated

or otherwise exposed to a sudden temperature

change, condensation could occur. Should this

happen, leave the unit for one or two hours before

turning the unit on.

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth.

Do not wipe with chemical cleaning cloths, paint

thinner, ethyl alcohol or other chemical agents to

clean the unit as they could damage the surface.

User registration

Customers in the USA, please visit the TASCAM

website (http://tascam.com/) to register as a user

online.

Содержание DP-008EX





























































































Результаты поиска

Содержание DP-008EX

Отзывы:

Похожие инструкции для DP-008EX

Бренды по названию

Популярные бренды

Tascam DP-008EX, Руководство пользователя

Результаты поиска

Содержание DP-008EX

Отзывы:

Похожие инструкции для DP-008EX

Бренды по названию

Популярные бренды