Tascam DM-4800 Скачать руководство пользователя | Manualshive

Страница: 135 / 138

background image

9 – Specifications : Messages and troubleshooting

TASCAM DM-4800

User’s Manual

135

✖

The current project is protected.
Press ENTER to continue.

Trying to overwrite a protected project.

✔

The current project is changed.
Store current project?
ENTER key : Store and Create
CURSOR key : Create

Changes have been made to the current project before a project creation.

✔

The current project is not on the CF card.
Store the current project?\
Cannot copy
automation data and library data.
ENTER key : Store and Shut down
CURSOR key : Shut down

An attempts has been made to shut down the DM-4800 with no project stored on the
card.

✔

The current project
is not on the CF card.
Store the current project?
Cannot copy
automation data and library data
ENTER key : Store and Create
CURSOR key : Create

Confirmation that the current project should be stored on the card (it is not already
there). Automation and library data will not be stored.

✔

The format of this CF card
is unsupported.
Format CF card ?
Press ENTER to confirm,
or a cursor key to cancel.

An unrecognized CF card has been inserted – this message suggests reformatting the
card in DM-4800 format.

✔

The last stored project
cannot be found.
Create project?
Press ENTER to confirm,
or a cursor key to cancel.

At power-on, the last stored project cannot be found (maybe the card has been
changed).

✖

The project name is not inputted.
Press ENTER to continue.

An attempt has been made to create a project without giving it a name.

●

The project reload was completed.

A project has been successfully reloaded.

✖

There is no project loaded.

When storing, no project is currently loaded, so the data can’t be stored.

✖

This name is already assigned.

The name of the newly-created project already exists on the card as a project name.

✖

This project is protected.

The project to be renamed is protected.

✖

This project is the current project
Can’t change.

The current project cannot be renamed.

✖

Timecode running!

An attempt has been made to create a project, etc. while timecode is still running. Stop
the timecode and try again.

✖

Turn cascade off ?
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation that the cascade is to be turned off.

✖

Turn cascade on ?
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation that the cascade is to be turned on.

●

Turn off power now.
Press ALT + STOP + PLAY to reboot.

The shutdown process is now complete, and the power can be turned off, or the DM-
4800 can be rebooted.

Action

Message

Meaning

Table 9.1: Popup messages (continued)

«
...
133
134
135
136
137
...
»

Содержание DM-4800











































































































































Отзывы:

Нет отзывов

Похожие инструкции для DM-4800

Бренд: Waring Страницы: 20

Бренд: Yamaha Страницы: 2

Бренд: Yamaha Страницы: 2

Бренд: Zapi Страницы: 11

Бренд: Prostage Страницы: 16

EUROPOWER PMP560M

Бренд: Behringer Страницы: 17

Ultra Tremolo PAN TP300

Бренд: Behringer Страницы: 2

Бренд: M-Audio Страницы: 4

Бренд: KitchenAid Страницы: 44

Бренд: Acnodes Страницы: 20

Бренд: Denon Страницы: 36

JERRY CANTRELL CRY BABY

Бренд: Dunlop Страницы: 4

Бренд: Gemini Страницы: 20

Бренд: aci Страницы: 17

Бренд: Trisa Страницы: 39

Бренд: Univex Страницы: 2

Бренд: Rane Страницы: 36

Бренд: Converters.TV Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды