Tascam DM-4800 Скачать руководство пользователя

Страница: 129 / 138

9 – Specifications : Messages and troubleshooting

TASCAM DM-4800

User’s Manual

129

✔

Format CF Card?
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation before formatting a CF card.

✔

Format failed.
Retry?
Press ENTER to confirm,
or a cursor key to cancel.

A CF card format operation has failed.

●

Formatting now.
Please do not turn off power
while formatting.

Warning not to remove power while card is being formatted.

✖

Fs has changed.
Mixer will reboot.
Press ENTER to confirm
or a cursor key to cancel.

Notice to restart the DM-4800 following a change of sampling frequency.

✔

FS mode after loading and
FS mode before loading is different.
Fs is switched and Reboot.
Press ALT+STOP+PLAY to reboot.

A project has been loaded which has changed the sampling frequency.

✖

FS modes do not match.
Cascade connection not established.
Press ENTER to continue.

Cascade master and slave must use the same sampling frequency.

✔

GATE Library BANK a-bbb
Name : TASCAM DATA
Create data: DEC/15/2004

20: 35: 45

Project Name: PROJECT ORCA
Project FS: 44.1kHz
Press ENTER to continue.

Information about a library entry (gate).

✔

GATE Library Preset a-bbb
Name : TASCAM DATA
Press ENTER to continue.

Information about a library preset entry (gate).

●

GATE Library
Bank a-bbb recalled.

A library entry has been recalled (gate).

✖

GATE Library
Preset 1-bbb is Read-only!

An attempt has been made to store to a protected library entry (EQ).

●

GATE Library
Preset a-bbb recalled.

A library preset entry has been recalled (gate).

●

Group x is not grouped.

A group does not exist to be used as a grouping layer.

✔

Grouping Link (Fader ->Mute)
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation that fader groups should be linked to mute groups.

✔

Grouping Link (Mute ->Fader)
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation that mute groups should be linked to fader groups.

●

HUI
DAW Control Emulator
optimized for ProTools
Press ENTER to continue.

Information on external control.

✔

Invert source ?
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation when changing between Input and Return sources.

✔

Invert source CHxx-CHxx?
Press ENTER to confirm,
or a cursor key to cancel.

Confirmation when making a batch change between Input and Return sources.

●

Loading project.
Do not remove the CF card.

Warning not to remove the card while a project is loading.

✖

Machine Control List Full
Press ENTER to c ntinue

The Machine Control List is full and an item must be deleted.

Action

Message

Meaning

Table 9.1: Popup messages (continued)

Содержание DM-4800











































































































































Результаты поиска

Содержание DM-4800

Отзывы:

Похожие инструкции для DM-4800

Бренды по названию

Популярные бренды

Tascam DM-4800, Руководство пользователя

Результаты поиска

Содержание DM-4800

Отзывы:

Похожие инструкции для DM-4800

Бренды по названию

Популярные бренды