Target FS 1218 EX, Руководство по эксплуатации

Страница: 8 / 24

DRAFT
8
5.0 Correct running direction
Never start to work with the machine before you have chosen correct running
direction.
The running control procedure has to be carried out when:
- Electricity has been connected to the machine.
- The machine has been moved to a new working area with new electrical
power supply.
The motor and blade shaft must always run forward as arrow (16) illustrated below.
Control procedure including all elements of start and stop, must be carried out
in accordance with the test procedure at page 7, and carried out without any
blade mounting on the blade shaft.
Running direction control:
Carry out the test procedure step 1 page 7
Observe which way the motor and blade
shaft are running.
If incorrect direction, continue with step 2.
Never change direction when
the main motor is running.
5.1 Running direction feeding motor
Remark:
The forward feeding motor is connected to the main
electricity. It is essential that correct main running
direction be chosen for the machine.
It is impossible to operate the feeding system, with
wrong motor direction.
The problem often occurs when the motor has been
changed, and the wiring has been connected wrong.
In case see page 21 for service of the feeding system.