Target FS 1218 EX, Руководство по эксплуатации

Страница: 10 / 24

DRAFT
10
7.0 Support wheel
This machine has an extra support wheel (1) to eliminate manual lifting of the machine when
moving, turning or up lining for correct cutting direction.
The wheel is connected to a hydraulic cylinder operated by three buttons (2) at the top panel.
27
Press button 13 and 14 simultaneously to
lower the support wheel. When it reaches the
floor the rear part of the machine will be
lifted up. Moving and turning operations
will now go very smoothly.
To replace the machine back to operating
position, press button 12 and 14
simultaneously and the support wheel will be
raised back to the upper position.
Always keep this wheel in upper position when not in use to eliminate damage.
This is particularly important at situation as loading, unloading and transport of
the machine.