Target FS 1218 EX, Руководство по эксплуатации

Страница: 15 / 24

DRAFT
15
13.0 Outer blade flanges
The outer blade flanges for mounting the diamond blade to the blade shaft are placed at a flange
holder inside the rear door.
Remark that the right side flange has left thread, and the left side flange has right
thread, these are respectively marked L and R.
LOCKING
Before mounting the blade be sure, that you have
chosen the blade flange with correct thread.
Place the blade on the blade shaft and fasten the
flange by following the arrows above.
UNLOCKING
Block the blade shaft with the standard wrench and use
the especially C-wrench (1) to unlock the outer blade flange.
Observe which side of the blade shaft you are working on to
ensure that you are turning the wrench in correct direction,
shown by the arrows!
Unlocking in wrong direction damage the flange and wrench,
as well as the blade shaft.
- Never let the blade flange stay mounted on the blade shaft if not engaged in the work.
- After use, always place the blade flanges back in the flange holder inside the frame.
- Never leave or store the saw with tools or blade flanges mounted to the machine.
- Always keep the flange systems lean. Damaged parts must be replaced immediately.