Target FS 1218 EX, Руководство по эксплуатации

Страница: 5 / 24

DRAFT
5
2.0 Electrical system
IMPORTANT!
This electric floor saw is available with different electrical systems.
Be absolutely sure that you have ordered and received the correct system on
your machine. It must correspond with the electrical power supply in your
working area.
Do not connect any electrical power, touch any buttons or operate any of the
electrical systems before you have carefully read and understood all the
instructions covered by this operating manual!
If you have never operated a similar machine before, please carrying out the
test procedures before you start working with the machine.
The electrical data will be found on the machine card and electrical diagram.
If you have the incorrect electrical system on your machine, take immediate
action, and contact your dealer!
Do not improvise! Electricity is very dangerous!
ELECTRICAL DIAGRAMS.
This machine is equipped with electrical systems in accordance with your order
and specifications. Wiring diagrams are separately enclosed with the machine.
Information about voltage, and document numbers for wiring diagram is placed
on the top of the operating panel.
Before use, always make sure that this information corresponds with the
electrical power supply in the working location.
Whenever new diagrams or other electrical service is required, be sure to
specify the exact information’s on the machine labels as indicated below.