Target FS 1218 EX, Руководство по эксплуатации

Страница: 16 / 24

DRAFT
16
14.0 12 volt winch system
The 12 V winch system is only to be used for loading,
unloading or moving the machine at very uneven ground
surfaces.
This winch system shall under no circumstances
be used to feed the machine when sawing.
The winch unit (1) is located in front of the basic frame. The wire rope are passing down through
the bottom part and out between the front wheels where the hook (2) is to be found.
SAFETY PRECAUTION WINCHING - SPOOLING
MOVING PART HAZARD
To Prevent Serious Injury And Property Damage:
• Do not operate winch before you have read
and understood the operator’s manual.
• Stand clear of wire rope and bad during
operation.
• Keep others away.
• Always inspect the condition of the winch
and wire rope, before operating winch.
• Do not exceed winch’s rated capacity.
• Never touch wire rope or hook while in
tension.
To Prevent Serious Injury:
• Keep hands clear of wire rope, hook and
fairlead opening during operation and when
spooling.
• Always use a rag or cord to hold hook when
spooling under no load.
• Wear heavy leather gloves when handling
wire rope.
• Never winch with less than 5 wraps of wire
rope around drum.