Target FS 1218 EX, Руководство по эксплуатации

Страница: 19 / 24

DRAFT
- 19 -
16.0 12 V Battery, service and troubleshooting
If the battery is impossible to recharge:
- Check that the power is correct and connected to the input plug 15 page 6.
- Check that the battery cables are fully connected to the electrodes.
- The ammeter shows that the charger is working, but the battery is impossible to recharge?
Check that the battery is not damaged or in bad condition.
- The Ammeter does not work?
Check that the fuse inside the charger is OK. See instruction below.
Temperature, unstable use or long storing is discharging the
battery. This influence on the lifetime of the battery, and change to
a new and fresh battery can be necessary.
When change, remark that the new battery needs to have the
electrodes (plus and minus) as illustrated
16.1 Charger - problem shooting
The battery charger located inside the main electric panel, have in-built a safety fuse (2) in case
of overload or other electric problems.
When charging and the Ammeter (3) do not make any reaction is the problem normally located
at this fuse.
Before you start to check the charger fuse: Un-plug all electricity!!
Remove the top cover for operating panel. The battery charger is located at left side frame. The
in-built fuse has to be found as illustrated below.
Unscrew cap (1) and change the fuse (2) when
necessary.