Target FS 1218 EX, Руководство по эксплуатации

Страница: 4 / 24

DRAFT
4
1.0 Technical information
FS 1218 EX
This model has an 18.5 kW electric motor and a blade shaft capacity of 950 rpm. The model
is well suited for Diamond blades between Ø 800 mm and Ø 1200 mm.
All Diamant Boart floor saw machines are designed for
using wet cutting Diamond blades.
When ordering Diamond blades, contact your dealer and refer to the technical data listed
below. Be sure to use correct type of blades. Incorrect blade may cause bad or non-cutting
results. Incorrect use may also result in vibration, damaged parts and overheating of the
motor.
Do not use diameter of the blade larger than necessary for the actual job situation. We
recommend pre-cutting with an Ø 800 mm blade, segments with 5 mm, before using Ø 1000
mm or Ø 1200 mm.
Technical data FS 1218 EX
Motor output kW/HP 18.5/25
Electricity * *
Blade guard Ø 1200
Cutting depth (maximum) mm 510
Blade shaft Rpm 950
Blade flange connection 0/mm Combi 25,4/60
L x W x FT cm 160x81x117
Weight kg 465
* Different electric systems possible see separate machine card and electric form.