TANDELTA OQSExISG2, Руководство пользователя

Страница: 93 / 130

Page | 91
Data Lo 5A
CRC 0CAB
06 (0x06) Write Single Register
11.3.5.4 Query
The Write command specifies the register reference to be preset and allows the remote
configuration of channel and system settings for management of the unit’s operation, and
modification for use in monitoring. The registers which hold the configuration parameters are:
Parameters
Registers
Decimal Registers
Hex
Instrument Address 11 0B
Serial Type 12 0C
Here is an example of a request to preset register 11 (instrument address) of device slave 1 to
change it to devices slave 4. Note that changing the instrument address or serial type will only
take effect after the sensor is shut down and restarted:
Field Name Example (Hex)
Slave Address 01
Function 06
Starting Address Hi 00
Starting Address Lo 0B
No. of Registers Hi 00
No. of Registers Lo 04
CRC Check F9CB
11.3.5.5 Response
The normal response is an echo of the query, returned after the register contents have been
preset.
Here is an example of a response to above query to preset register 11, instrument address to 4.
Field Name Example (Hex)
Slave Address 01
Function 06
Starting Address Hi 00
Starting Address Lo 0B
No. of Registers Hi 00
No. of Registers Lo 04
CRC Check F9CB
17 (0x11) Report Slave ID
Returns information about the slave device. Currently returns only the Version No. of the probe
firmware.